ZIM file format

Beginning 2021, we change the way we handle namespaces in ZIM file format.

This is major change in the way we handle entries in libzim and the semantics around but it is not a break in the binary zim format. Old library/readers are compatible with new zim files.

This page describe the new format. The old format can be found here : ZIM file format old namespace.

Header

A ZIM archive starts with a header :

Field Name	Type	Offset	Length	Description
magicNumber	integer	0	4	Magic number to recognise the file format, must be 72173914 (0x44D495A)
majorVersion	integer	4	2	Major version of the ZIM archive format. Major version is updated when an incompatible change is integrated in the format (a lib made for a version N will probably not be able to read a version N+1)
minorVersion	integer	6	2	Minor version of the ZIM archive format. Minor version is updated when an compatible change is integrated (a lib made for a minor version n will be able to read a version n+1)
uuid	integer	8	16	unique id of this zim archive
entryCount	integer	24	4	total number of entries
clusterCount	integer	28	4	total number of clusters
urlPtrPos	integer	32	8	position of the directory pointerlist ordered by URL
titlePtrPos	integer	40	8	position of the directory pointerlist ordered by Title This is considered as obsolete, readers should use X/listing/titleordered/v0 instead and fallback to titlePtrPos if entry is not present.
clusterPtrPos	integer	48	8	position of the cluster pointer list
mimeListPos	integer	56	8	position of the MIME type list (also header size)
mainPage	integer	64	4	main page or 0xffffffff if no main page
layoutPage	integer	68	4	layout page or 0xffffffffff if no layout page (deprecated, always 0xffffffffff)
checksumPos	integer	72	8	pointer to the md5checksum of this archive without the checksum itself. This points always 16 bytes before the end of the archive.

A ZIM archive may be embedded in another file at a specific offset. In the context of the ZIM format, the start of the ZIM header is the offset 0. Readers allowing to read an embedded archive must adapt offset accordingly.

Major & Minor versions

Versioning of the file format specification has not been done rigorously until version 5.

Before version 5, there was only one version number and no Major vs Minor distinction.

ZIM format versions

Major	Minor	Backward compatible	Description	libzim version
0		no	This version features have not been tracked properly	Unknown
1		no	This version features have not been tracked properly	Unknown
2		no	This version features have not been tracked properly	Unknown
3		no	This version features have not been tracked properly	Unknown
4		no	This version features have not been tracked properly	Unknown
5		yes	Introduces: - Url index (was only title indexed before) - MimeList Pos	From date 2009-11-29 Until 6.3.1 (included)
5	0	yes	Introduces: - Notion of Major and Minor version	From 3.2.0
6	0	no	Introduces extended clusters Still uses "old" namespaces	From 3.2.0
	1	yes	Introduces "new" namespaces scheme	From 7.0.0
	2	yes	Explicitly allows alias entries (several entries pointing to the same cluster/blob)	From 9.1.0

MIME Type List (mimeListPos)

The MIME type list always follows directly after the header, so the mimeListPos also defines the end and size of the ZIM file header.

The MIME types in this list are zero terminated strings. An empty string marks the end of the MIME type list.

Field Name	Type	Offset	Length	Description
<1st MIME Type>	string	0	zero terminated	declaration of the <1st MIME Type>
<2nd MIME Type>	string	n/a	zero terminated	declaration of the <2nd MIME Type>
...	string	...	zero terminated	...
<last entry / end>	string	n/a	zero terminated	empty string - end of MIME type list

URL Pointer List (urlPtrPos)

The URL pointer list is a list of 8 byte offsets to the directory entries.

The directory entries are always ordered by "full" URL (<namespace><path>). Ordering is simply done by comparing the URL strings.

Since directory entries have variable sizes this is needed for random access.

Field Name	Type	Offset	Length	Description
<1st URL>	integer	0	8	pointer to the directory entry of <1st URL>
<2nd URL>	integer	8	8	pointer to the directory entry of <2nd URL>
<nth URL>	integer	(n-1)*8	8	pointer to the directory entry of <nth URL>
...	integer	...	8	...

Libzim caches directory entries and references the cached entries via the URL pointers.

Title Pointer List (titlePtrPos)

The title pointer list is a list of entry indices ordered by title (<namespace><title>). The title pointer list actually points to entries in the URL pointer list.

Note that the title pointers are only 4 bytes. They are not offsets in the file but entry numbers.

To get the offset of an entry from the title pointer list, you have to look it up in the URL pointer list.

Field Name	Type	Offset	Length	Description
<1st Title>	integer	0	4	pointer to the URL pointer of <1st Title>
<2nd Title>	integer	4	4	pointer to the URL pointer of <2nd Title>
<nth Title>	integer	(n-1)*4	4	pointer to the URL pointer of <nth Title>
...	integer	...	4	...

The indirection from titles via URLs to directory entries has two reasons:

• the pointer list is only half in size as 4 bytes are enough for each entry
• accessing directory entries by title also makes use of cached directory entries which are referenced by the URL pointers, as implemented in libzim.

Directory Entries

Directory entries hold the meta information about all entries, images and other objects in a ZIM archive.

There are different types of directory entries:

Content Entry

Field Name	Type	Offset	Length	Description
mimetype	integer	0	2	MIME type number as defined in the MIME type list
parameter len	byte	2	1	(not used) length of extra paramters (must be 0)
namespace	char	3	1	defines to which namespace this directory entry belongs
revision	integer	4	4	(not used) identifies a revision of the contents of this directory entry, needed to identify updates or revisions in the original history (must be 0)
cluster number	integer	8	4	cluster number in which the data of this directory entry is stored
blob number	integer	12	4	blob number inside the compressed cluster where the contents are stored
url	string	16	zero terminated	string with the URL as refered in the URL pointer list
title	string	n/a	zero terminated	string with an title as refered in the Title pointer list or empty; in case it is empty, the URL is used as title
parameter	data		see parameter len	(not used) extra parameters

Redirect Entry

Field Name	Type	Offset	Length	Description
mimetype	integer	0	2	0xffff for redirect
parameter len	byte	2	1	(not used) length of extra paramters
namespace	char	3	1	defines to which namespace this directory entry belongs
revision	integer	4	4	(not used) identifies a revision of the contents of this directory entry, needed to identify updates or revisions in the original history (must be 0)
redirect index	integer	8	4	pointer to the directory entry of the redirect target
url	string	12	zero terminated	string with the URL as refered in the URL pointer list
title	string	n/a	zero terminated	string with an title as refered in the Title pointer list or empty; in case it is empty, the URL is used as title
parameter	data		see parameter len	(not used) extra parameters

None of the strings should have control characters from U+0000 through U+001F.

Linktarget or deleted Entry (DEPRECATED)

There is two kinds of deprecated entry that could be found in pretty old zim files (I, main develloper of libzim, never saw it).

They have mimetype equal to 0xfffe or 0xfffd. Reader implementation may check for those value and ignore the whole dirent.

Cluster Pointer List (clusterPtrPos)

The cluster pointer list is a list of 8 byte offsets which point to all data clusters in a ZIM archive.

Field Name	Type	Offset	Length	Description
<1st Cluster>	integer	0	8	pointer to the <1st Cluster>
<1st Cluster>	integer	8	8	pointer to the <2nd Cluster>
<nth Cluster>	integer	(n-1)*8	8	pointer to the <nth Cluster>
...	integer	...	8	...

Clusters

The clusters contain the actual data of the directory entries. Clusters can be compressed or uncompressed. The purpose of the clusters are that data of more than one directory entry can be compressed inside one cluster, making the compression much more efficient. Typically clusters have a size of about 1 MB.

The first byte of the cluster identifies some information about the cluster.

The first fourth low bits identifies if the cluster compression type:

• No compression is indicated by a value of 1
• Compressed clusters are indicated by a value of 4 (LZMA2 compression (or more precisely XZ, since there is a XZ header)) or 5 (Zstandard compression).
• There have been other compression algorithms used before which have been removed: 2 for zlib and 3 for bzip2.
• 0 is an obselete code for no compression (inhereted from the Zeno)

The fifth bit identifies the cluster is extended or not :

• By default (5th bit == 0) the cluster is not extended. It means that the offsets are stored in a 4 bytes length integer. Thus contents stored in the cluster cannot exceed 4Go.
• If the cluster is extended (5th bit == 1), the offsets are stored in 8 bytes length integer. Thus contents stored in the cluster can exceed 4Go.

A cluster can be extended only if the zim major version is 6. Else (major version == 5) cluster will always be not extended.

The libzim uses xz-utils as a C++ implementation of lzma2, for Java see XZ-Java.

To find the data of a specific directory entry within a cluster the uncompressed cluster has a list of pointers to blobs within the uncompressed cluster after the first byte.

Field Name	Type	Offset	Length	Description
cluster information	integer	0	1	Fourth low bits : 1: no compression, 4: LZMA2 compressed, 5: zstd compressed Firth bits : 0: normal (OFFSET_SIZE=4) 1: extended (OFFSET_SIZE=8)
The following data bytes have to be uncompressed!
<1st Blob>	integer	1	OFFSET_SIZE	offset to the <1st Blob>
<2nd Blob>	integer	1+OFFSET_SIZE	OFFSET_SIZE	offset to the <2nd Blob>
<nth Blob>	integer	(n-1)*OFFSET_SIZE+1	OFFSET_SIZE	offset to the <nth Blob>
...	integer	...	OFFSET_SIZE	...
<last blob / end>	integer	n/a	OFFSET_SIZE	offset to the end of the cluster
<1st Blob>	data	n/a	n/a	data of the <1st Blob>
<2nd Blob>	data	n/a	n/a	data of the <2nd Blob>
...	data	...	n/a	...

The offset addresses uncompressed data. The last pointer points to the end of the data area. So there is always one more offset than blobs. Since the first offset points to the start of the first data, the number of offsets can be determined by dividing this offset by OFFSET_SIZE. The size of one blob is calculated by the difference of two consecutive offsets.

Namespaces

Namespaces separate different types of directory entries - which might have the same title or url - stored in the ZIM archive Format.

The new namespace usage put a strong semantics on the namespaces. The libzim uses this semantics and provide different kind of API to access the different kind of entries.

The libzim hide the namespace to the user, so a entry `foo.html` in namespace `C` will be accessible as `foo.html`. libzim provides specific API to access metadata.

Other implementation are free to explicit the namespace or not (but need to provide some fallback for all namespace usage)

Namespace	Description
C	User content entries - see Article Format
M	ZIM metadata - see Metadata
W	Well know entries (MainPage, Favicon) - see Well known entries
X	search indexes - see Search indexes

URLs

URL Encoding

The URLs in the UrlPointerlist are utf-8 and are not url encoded (https://www.ietf.org/rfc/rfc1738.txt)

Some readers process the requests that already do the url decoding internally whereas most readers will handle the URLs directly. In this case you have to do the decoding before you pass the parameter to libzim.

Local Anchors

Many articles - especially when a table of contents is used - use local anchors to jump within an article.

<a href="foo#headline1">jump to article foo, headline 1</a>

The browser handles these local anchors by itself. It will determine if another article has to be loaded (local anchor inside another article than the currently shown) and will send a request only with the article URL without the local anchor - in our example "foo". After the article has been loaded the browser will then search for the local anchor tag and jump to the right location.

If you use a common rendering engine or HTML widget you don't have to care for this cases, you can just use the requests as they are submitted by the engine / widget.

Should you render the article contents by yourself you have to consider this and take care of it before you hand requests to libzim.

Encodings

Character Encoding

The standard encoding for ZIM archive content is UTF-8. So both article data and URLs should be handled accordingly.

Integer Encoding

All types are little-endian.

All integers are unsigned integers (uint_16, uint_32, uint_64).

All lengths are bytes.

Split ZIM files

ZIM archives can be split in multiple files. This is necessary to be able to store big (over 4GB for example) ZIM archives to limited file systems (like FAT32). That said, the files can be of any size, but the naming is really important. The ZIM files should be named like following (the file name extensions matter): foobar.zimaa, foobar.zimab, foobar.zimac...

See also

• Zeno file format (deprecated)
• ZIM File Format/4 (deprecated)
• ZIM File Example